Copperas Cove Custom Cabinets
Cabinet Refacing And Refinishing in Copperas Cove, TX
Cabinet refacing and refinishing in Copperas Cove, TX. Keep sound boxes, update doors and finish, save against a full tear-out. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Copperas Cove and nearby communities.
If your cabinet boxes are solid but the doors are worn, dated, or swollen at the edges, refacing gets you a new kitchen without a full tear-out. Refinishing is the lighter option when the boxes and doors are both still good and just need a new stain or paint.
Copperas Cove Custom Cabinets inspects the boxes first and tells you honestly which path fits, since boxes that are already warped or water-damaged need replacement no matter what the doors look like.
What's included
What's included with Cabinet Refacing And Refinishing
Typically included Optional Customer prep
- Box inspection for structural soundness and square
- New doors and drawer fronts or full veneer resurfacing
- Matching hardware (hinges, pulls, slides)
- Protective topcoat application
- Interior shelf replacement
- Soft-close hinge upgrades
- Crown molding or trim updates
- Clear cabinet contents before the crew arrives
- Decide on door style/finish ahead of the appointment
- Note any boxes with visible water damage or sagging shelves
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refacing And Refinishing process works
Step 1Initial Inspection
We assess existing cabinets to determine refacing or refinishing needs.
Step 2Surface Preparation
Cabinet surfaces are cleaned and prepped for new materials.
Step 3Door Replacement
New doors are fitted to update the cabinet's appearance.
Step 4Veneer Application
Veneer is applied to cabinet boxes for a refreshed look.
Step 5Finish Coating
A new finish is applied to match the updated cabinet style.
Step 6Final Detailing
Hardware and trim are adjusted for a polished final result.
Materials
Materials and methods for Cabinet Refacing And Refinishing
Central Texas humidity swings are hard on cheap veneers and raw wood fillers, so we pick materials that hold a finish through summer heat and winter dryness without lifting at the seams.
Veneer Sheets
Thin wood layers bonded to the existing box, giving old cabinets a new surface without replacing the carcass.
Replacement Cabinet Doors
New doors built to the exact opening size, so the update looks like a factory kitchen instead of a patch job.
Wood Fillers
Used to level dents and gouges in the box before veneer or paint goes on, so the final surface reads flat.
Stain Finishes
Applied in coats suited to humidity shifts, bringing out grain without clouding or streaking later.
Hardware Upgrades
New hinges and pulls sized to match existing hole patterns where possible, avoiding extra drilling.
Protective Topcoat
A sealant layer that resists kitchen steam and cleaning wipe-downs better than a bare stain coat alone.
Questions on materials?
Get a Free EstimateCost
What does a Cabinet Refacing And Refinishing cost in Copperas Cove?
Refacing almost always costs less than a full replacement, since the boxes stay put and labor focuses on doors and surfaces. Call for a free estimate once we've looked at your boxes in person, since condition drives the final number more than cabinet count alone.
| Project type | Typical range | What’s included |
|---|---|---|
| Refinishing only | $1,200–$3,000, | strip, repair, and refinish existing doors and boxes in place. |
| Standard refacing | $2,500–$7,000, | new doors, drawer fronts, hardware, and veneer on visible box surfaces. |
| Full kitchen refacing | $6,000–$12,000, | larger kitchens with more linear footage and upgraded hardware. |
| Add-on upgrades | $300–$1,200, | soft-close hinges, interior shelf replacement, or trim detailing. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing And Refinishing
Always confirm with Coryell County or your local building office before starting, since requirements can shift by project scope.
| Typically needs a permit | Often no permit |
|---|---|
| Projects that relocate plumbing or add a new sink location | Door and drawer front replacement |
| Work that changes electrical outlets behind cabinetry | Box resurfacing with veneer |
| — | Hardware swaps |
| — | Refinishing existing doors in place |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Cabinet Refacing And Refinishing
| DIY | Hire a pro |
|---|---|
| Simple hardware swaps (new pulls on existing holes) | Matching veneer seams so they're invisible after install |
| Minor touch-up staining on a single door | Fitting new doors square to boxes that have settled over time |
| Cleaning and conditioning wood surfaces | Spraying a durable topcoat evenly without drips or streaks |
| — | Diagnosing whether a box is actually sound enough to reface |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing And Refinishing
Call Copperas Cove Custom Cabinets for a free estimate and an honest read on which option fits your cabinets.
- Doors are faded, swollen, or peeling but the boxes still feel solid
- You're prepping a kitchen for sale and want a faster, lower-cost update
- Hardware is outdated but you don't want to touch the layout
- You're not sure if your cabinets need refinishing or full replacement
Seeing warning signs?
Get a Free EstimateBefore & after
Before and after Cabinet Refacing And Refinishing
Before 
After
FAQs
Cabinet Refacing And Refinishing FAQs
How much does cabinet refacing cost compared to full replacement?
Refacing typically runs 40-60% less than a full tear-out replacement, since the box construction and installation labor are already done.
How long does a refacing job take?
Most refacing projects finish in 3-5 days, compared to several weeks for a full cabinet replacement.
Can you refinish cabinets instead of replacing the doors?
If the existing doors are structurally sound and just need new stain or paint, refinishing is the faster, cheaper option.
Do I need a permit for cabinet refacing?
No, , since the boxes and plumbing stay in place. A permit only applies if you're adding new electrical or plumbing.
Is DIY cabinet refinishing a good idea?
Simple touch-ups are fine for a confident DIYer, but veneer application and spray finishes are easy to botch without the right setup.
What's the difference between refacing and refinishing?
Refacing replaces the doors and resurfaces the boxes. Refinishing just restores the existing doors and boxes with new stain or paint.
How do I know if my cabinets need refacing or full replacement?
If the boxes are square, dry, and free of water damage, refacing works. If shelves sag or boxes are warped, replacement is the better call.
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Custom kitchen cabinets built to fit your kitchen, not a factory spec sheet. Free estimates in Copperas Cove, TX.
Custom Kitchen Remodels
Full custom kitchen remodels: layout, cabinetry, and finish-out. Free estimates for Copperas Cove, TX homeowners.
Built-In Shelving And Wall Units
Custom built-in shelving and wall units fit to your exact wall. Free estimates in Copperas Cove, TX.
Ask about Cabinet Refacing And Refinishing
Tell us about the project and how to reach you.